 | The service line |
| The meter box |
| The main disconnect |
| And determine the service amperage |
| Panels, breakers and fuses |
| The grounding |
| The bonding |
| A representative sampling of switches, receptacles,
light fixtures, and ground circuit interrupters |
| And report the presence of solid conductor aluminum
branch circuit wiring if readily visible |
| And report on any GFCI-tested receptacles
in which power is not present, polarity is incorrect, the receptacle is
not grounded, is not secured to the wall, the cover is not in place, the
ground fault circuit interrupter devices are not properly installed or do
not operate properly, or evidence of arcing or excessive heat is present.
|
| The service entrance conductors and the condition of
their sheathing |
| The ground fault circuit interrupters with a GFCI
tester |
| And describe the amperage rating of the service |
| And report the absence of smoke detectors |
| Service entrance cables and report as in need of repair
deficiencies in the integrity of the insulation,
drip loop, or separation of conductors at weather heads and clearance |
